Are you looking for an easy way to replace or change your toilet cistern in your bathroom? Service First Plumbing will take care of the task quickly, efficiently and at an affordable rate.
A cistern is one of the most crucial parts of your toilet, responsible for holding water for the flushing system.
Replacing a cistern on your own can be tough and messy, which is why you should give us a call for installation and replacements 24/7, anywhere in Sydney. Feel free to reach out to us for all your toilet repair and maintenance needs!
Is It Time For A Cistern Replacement?
Not sure if you need to replace your toilet cistern?
When considering function, you may only ever need to replace toilet cisterns if you face a fault with them. Ask yourself:
- Can I hear water running instead of the tank?
- Is my toilet flushing properly?
- Is it old, outdated or damaged?
Issues ranging from a steady stream of water running into the bowl to the flush not functioning all contribute to reasons for changing toilet cisterns.
The other reason you may want to change toilet cistern is if they no longer suit your bathroom style. Perhaps you have recently renovated your bathroom, and the old cistern feels out of place. Alternatively, it could be that the old tank has become old and weary enough to appear unsightly, requiring a change. In any case, you may have your toilet cistern replaced within minutes.
Replacing Your Toilet Cistern With Ease!
Our Service First Plumbing expert will begin the replacement process by turning off the water supply. This will prevent water from flowing out while they remove the old cistern.
Next, your inlet pipe and screws will be unscrewed by our trained professional, all located underneath the cistern. Your old cistern will be carefully removed and placed aside, safely out of the way.
Following that, our Sydney plumbing expert will perform the steps above in reverse order to install the new cistern. They will start with inserting and tightening the inlet pipe, then placing the tank where the old cistern used to be. Utilising plumber’s tape and washers to their advantage, the inlet pipe will be sealed.
Once the new cistern is installed, the plumber will turn the water supply on again and check for leaks.
If any, they will act suitably, tightening the inlet hose with an adjustable wrench. We will do a final inspection and check over to ensure everything is working correctly. After this, your new cistern will be ready for use!